Quick Answer: Metal Building and Concrete Package
A metal building and concrete package is the steel kit plus the slab it bolts to, quoted together. A 30x40 package, kit and 4-inch slab, is $18,000–$52,800, and the same building erected and permitted is $25,800–$75,900 installed. A 24x30 is $10,820–$31,640 for kit and slab, and a 50x100 is $65,000–$170,000. The slab alone runs $6–$12 per sq ft, and the pour waits for the building's engineered drawings.
Simplify your research by letting us do the work for you.

A metal building and concrete package is a steel building kit and the slab it bolts to, sold as one job. Buyers search for it as a metal building with a slab, because the kit alone leaves the biggest single decision, the floor, to somebody else. A metal building and concrete package puts the building and the floor on one quote.
This page is for anyone pricing a shop, garage, barn or warehouse who wants the slab counted from the start. It prices the kit and a 4-inch slab at six common sizes, shows what the rest of the installed total adds, and explains why the pour waits for the drawings. The slab figures come from a published cost guide, credited where they appear, and the Sources list is at the foot of the page. If you are still choosing a size, start with metal building prices.

What a Metal Building and Concrete Package Holds
A metal building and concrete package has two parts. The first is the steel kit: frame, panels, trim and fasteners, with the engineered drawings that come with the order. The second is the slab, a concrete floor poured to those drawings. One quote covers both, and the schedule runs the slab first and the frame second.
What it does not hold is the rest of the installed total. Erection, site preparation and permits are their own lines, and the tables below keep them apart. That way you can see which part is the building and which part is the floor.
Steel building makers describe the kit as the building, and the foundation as work done to its plan. The Metal Building Manufacturers Association says metal buildings are governed by the same building codes and material standards as other forms of construction. The slab is therefore part of a code-governed structure, not an afterthought.

Kit and Slab Prices by Size
This is the table most buyers want. Each row prices the kit, a 4-inch slab at $6–$12 per sq ft, and the two added together, which is the package before erection, site preparation and permits. The last column shows the installed range, with those lines included.
| Size | Steel kit | 4-inch slab | Kit and slab | Installed |
|---|---|---|---|---|
| 20x20 (400 sq ft) | $5,200–$10,000 | $2,400–$4,800 | $7,600–$14,800 | $11,400–$28,300 |
| 24x30 (720 sq ft) | $6,500–$23,000 | $4,320–$8,640 | $10,820–$31,640 | $16,200–$48,900 |
| 30x30 (900 sq ft) | $8,100–$28,800 | $5,400–$10,800 | $13,500–$39,600 | $19,800–$59,100 |
| 30x40 (1,200 sq ft) | $10,800–$38,400 | $7,200–$14,400 | $18,000–$52,800 | $25,800–$75,900 |
| 40x60 (2,400 sq ft) | $16,800–$57,600 | $14,400–$28,800 | $31,200–$86,400 | $45,000–$123,900 |
| 50x100 (5,000 sq ft) | $35,000–$110,000 | $30,000–$60,000 | $65,000–$170,000 | $91,800–$238,700 |
Read across a row of the metal building and concrete package table and the slab is the second-largest line after the kit. At 30x40 it is $7,200 to $14,400 against a kit of $10,800 to $38,400. The ranges are wide because kits vary with snow and wind load, framing and trim, and slabs vary with the site.
The kit and slab column adds the two ranges directly. Low adds to low and high adds to high, so a real quote usually lands somewhere between the two ends and not on either one. Buildings up to 1,500 sq ft start at a 10 foot eave, and larger ones start at 12 feet. Each foot above the start adds about 3% of the kit.
Get Your Kit and Slab Priced Together
Send the size and eave height once, and compare what suppliers quote for the building and the floor.
- Up to 5 quotes, fast and easy
- One short form
- Zero obligation
Compare quotes and decide

How the Installed Total Builds Up
A metal building and concrete package is the biggest part of a project, not the whole of it. Here is a 30x40 line by line, with the building and the slab on their own lines.
| Line, 30x40 (1,200 sq ft) | Low | High |
|---|---|---|
| Steel kit | $10,800 | $38,400 |
| 4-inch slab, 1,200 sq ft at $6–$12 per sq ft | $7,200 | $14,400 |
| Kit and slab | $18,000 | $52,800 |
| Erection, 1,200 sq ft at $5–$12 per sq ft | $6,000 | $14,400 |
| Site preparation | $1,300 | $5,600 |
| Permits | $500 | $3,100 |
| Installed total | $25,800 | $75,900 |
The installed total is the sum of its lines, low to low and high to high. Doors, windows, insulation and electrical are extra, so treat the total as a plain shell on a slab. For other sizes, the 30x30, 30x40 and 40x60 pages go deeper on what each fits.

The Slab Itself: Thickness, Edges and Base
A shop or garage floor is usually a 4-inch slab, which is the thickness the ranges here are built on. Heavier loads call for more. This Old House says additional material is usually needed for slabs that hold a great deal of weight. It prices thicker slabs higher and lists about $5 per square foot at 4 inches, $6 at 6 inches and $8 at 8 inches.
A building slab is more than a flat pad. The edges carry the load of the walls, so they are thickened, and the building's drawings show where. Under the concrete sits a prepared base, and where the floor will be finished or the ground is damp, a vapor retarder goes in as well. Reinforcement is a choice made with the engineer. This Old House lists wire mesh at about $0.35 per square foot and steel rebar at $2 to $3, with reinforced thicker edges for heavier loads at $1 to $2.
Then the concrete has to cure. The frame goes up on a cured slab, which is one reason the schedule matters. Ask for the cure time your concrete contractor expects before the erection crew is booked.

What Concrete Costs per Square Foot
This Old House, in a guide updated in March 2026, puts concrete slabs at $4–$8 per square foot. The ranges on this page use $6 to $12, which allows for a building slab with thickened edges, a prepared base and a site that is not perfectly easy. A quote under $6 is believable on flat, open ground. A quote over $12 deserves a question about what is in it.
The same guide prices the material alone: a cubic yard covers 81 square feet at 4 inches thick and costs $113 to $126. A 30x40 slab is 1,200 sq ft, which is about 15 cubic yards. The rest of the price is labor, base, forming, finishing and delivery, which is why the per-square-foot figure is the one to budget with.

What Moves the Slab Price
Five things move a slab more than the others.
- Thickness. More inches mean more concrete and more labor, as the figures above show.
- Grading and soil. This Old House notes a contractor may charge more if the incline is steep or the ground grade needs adjusting beforehand. Soft soil can call for more base.
- Access. A concrete truck needs a firm path to the pad. A long haul or a narrow gate adds labor.
- Edges and extras. Thickened edges, reinforcement, aprons and approaches outside the doors all add concrete.
- Frost depth. Where the code sets a footing depth below the frost line, the edge digs deeper and costs more. Your building department sets it.
Give every bidder the same facts: building size, door positions, the load the floor will carry, and whether you want an apron. Then the bids compare.
Compare Package Quotes for Your Size
Ask each supplier to quote the kit and the slab as separate lines, then compare the same scope side by side.
- Up to 5 quotes, fast and easy
- One short form
- Zero obligation
Compare quotes and decide

Who Pours the Slab and Why It Waits
A local concrete contractor usually pours the slab, even when the package is sold as one job. What the contractor works to is the building's engineered drawings: the anchor bolt layout, the column positions and the edges that need extra thickness all come from the loads the building transfers to the ground.
That is why the pour waits. The drawings are produced after the order, and a slab poured before them risks anchor bolts in the wrong places. A metal building and concrete package handles this by tying the two together. The slab is scheduled to the drawings, and the frame is scheduled to the slab.
Ask for the foundation drawing early, and ask who checks the finished slab against it before the erection crew arrives. A slab that is out of position is far cheaper to find before the steel is on site.

Package or Buying Separately
Buying the kit and hiring the slab yourself, instead of a metal building and concrete package, works, and many owners do it. The difference is coordination, not materials.
- A metal building and concrete package: one quote, one schedule, and one party answering when the slab and the building do not match.
- Separate: a local contractor you choose, a bid you can negotiate on its own, and two schedules you have to line up yourself.
Neither is the cheaper choice by rule, and no published source puts a percentage on the difference. Ask for both and compare the lines. The slab line should match the concrete slab calculator within the range of your site conditions, and the metal building kits page shows what the kit itself contains.

Permits and Codes
In most places the building and its slab are permitted together, so plan on a permit for the whole job. Rules vary by county and city, and a few set a separate review for the foundation. Ask the building department before you order.
The Department of Energy's Building Energy Codes Program says its COMcheck software and web tools simplify and clarify energy code compliance with the IECC and ASHRAE Standard 90.1, which matters if the slab edge or floor is insulated. The International Code Council keeps a map of where each I-Code has been adopted, and local amendments sit on top of it. The slab, the footing depth and the anchor details answer to the code your jurisdiction uses. The permit line in the ranges above runs $500 to $3,100. Read more in metal building permits and codes.

Getting Quotes You Can Compare
To compare bids, send every supplier the same list: width, length, eave height, door sizes and positions, ground snow load, wind speed, and the slab thickness you want. Ask for the kit and the slab as separate lines and for the erection on its own. Then you can see what the building costs and what the floor adds.
Use the metal building cost estimator to rough out the building first and the 3D metal building designer to place the doors. For a garage-sized job, metal garage kits shows the common sizes.
Decide on the slab before the permit goes in. It is simplest when planned once, with the drawings in hand.
Frequently Asked Questions About a Metal Building and Concrete Package
A metal building and concrete package is the steel building kit and the concrete slab it sits on, quoted as one job with one schedule. The slab is poured to the building's anchor bolt plan, and the frame is erected on it after the concrete has cured.
A 30x40 kit with a 4-inch slab is $18,000 to $52,800, and a 50x100 is $65,000 to $170,000. Erection, site preparation and permits bring a 30x40 to $25,800 to $75,900 installed.
The ranges on this page use $6 to $12 per sq ft for a 4-inch slab. This Old House puts concrete slabs at $4 to $8 per square foot, so a quote near the low end of this page's range is plausible on an easy site.
No. The kit is the steel. The slab is a separate line, and a package puts it next to the kit so you can see both prices on one quote.
The anchor bolt layout and the thickened edges come from the engineered drawings, which are drawn after the order. A slab poured first can miss the bolt positions.
Four inches is the figure used here for a shop or garage floor. Heavier trucks, equipment or stored loads call for a thicker slab, which an engineer or the building maker should set.
Plan on one. In most places the building and the slab are permitted together. Ask your county or city building department before you order.
Yes. A local contractor can pour to the drawings. The trade-off, against a metal building and concrete package, is two schedules and two bids to coordinate instead of one.
No. Erection of $5 to $12 per sq ft, site preparation of $1,300 to $5,600 and permits of $500 to $3,100 are separate lines in the installed range.
Sources
- This Old House. How Much Does a Concrete Slab Cost? (updated March 2026). Slabs at $4–$8 per square foot; a cubic yard covers 81 sq ft at 4 inches and costs $113–$126; grading and extras raise the price. thisoldhouse.com
- This Old House. Concrete Slab Cost. Price by thickness (about $5 at 4 inches, $6 at 6, $8 at 8), wire mesh and rebar costs, extra material for heavy loads. thisoldhouse.com
- Metal Building Manufacturers Association. Design Resources. Metal buildings follow the same codes and standards as other construction. mbma.com
- U.S. Department of Energy. Building Energy Codes Program. COMcheck and web tools for IECC and ASHRAE Standard 90.1 compliance. energycodes.gov
- International Code Council. Code adoption map. State-by-state I-Code adoption details. iccsafe.org
Related Resources
- Concrete Slab Calculator: Yards and Cost
- Metal Building Prices: Ranges by Size
- Metal Building Kits: What Is in the Box
- Metal Building Permits and Codes
- Metal Garage Kits: Sizes and Prices
Price the Building and Its Slab
Share the size, eave height and slab thickness, and compare what suppliers quote for the whole package.
- Up to 5 quotes, fast and easy
- One short form
- Zero obligation
Compare quotes and decide
