Quick Answer: 2 Car Garage
A standard 2 car garage is 24×24 feet, or 576 square feet. The minimum is 20×20 (400 sq ft), and a roomy one with bench space is 24×30 (720 sq ft). A steel kit for a 24×30 runs about $6,500–$23,000 in materials, and about $16,200–$48,900 installed with the slab, erection, site work and permits. Plan on two 9-foot doors or one 16-foot door.
Simplify your research by letting us do the work for you.

A 2 car garage looks simple on a plan and turns out to be a question of inches. Two cars fit in 20 feet of width. Two cars you can walk around, open the doors on and still reach the lawn mower behind need more. This page gives you the 2 car garage dimensions people actually build, in plain numbers, so you can pick a footprint before you talk to anyone.
It is written for a homeowner or small-shop owner pricing a steel garage. You will see minimum, standard and roomy sizes with their square footage, door widths and eave heights, what fits inside, and what a steel garage costs as a kit and fully installed.
2 Car Garage Dimensions: Minimum, Standard and Roomy
Start with the answer most searchers want: how big is a 2 car garage? There is no single legal size, only the sizes builders settle on. Here is the range, from tight to comfortable, with the floor area of each.
| Size (W × D) | Square Footage | What It Is | How It Feels |
|---|---|---|---|
| 20×20 | 400 sq ft | Minimum two car garage dimensions | Two cars, little else. Doors open only partway. |
| 22×22 | 484 sq ft | Tight standard | Two mid-size cars with a narrow walkway |
| 24×24 | 576 sq ft | Standard 2 car garage size | Two cars, doors open fully, a shelf on one wall |
| 24×30 | 720 sq ft | Roomy, or an oversized 2 car garage | Two vehicles plus a workbench at the back |
| 24×36 | 864 sq ft | Deep bay | Two trucks nose in, shop space behind |
| 30×30 | 900 sq ft | Workshop garage | Two vehicles and a full side for tools or a hobby |
So the average 2 car garage size sits around 24×24, which is 576 square feet. Many older homes have smaller ones. Newer builds and steel garages trend bigger, because vehicles grew and so did the stuff that gets stored with them.
The width is the number to protect. A building that is too short can get a lean-to later. One that is too narrow stays narrow.

Two Car Garage Square Footage and Width, Size by Size
Searchers ask this a dozen ways. How many square feet is a 2 car garage? What is the square footage of a two car garage? How wide is a standard 2 car garage? The honest answer is a band. A typical two car garage square footage runs from about 400 to 600 square feet, and a comfortable one lands between 600 and 900.
Width works the same way. The width of a 2 car garage is commonly 20 to 24 feet inside the walls, and a 24-foot width is the one most people mean by standard. Depth is usually 20 to 24 feet, with 30 or more when you want workspace behind the cars.
How to read the sizes
- 20 feet wide: the 2 car garage minimum dimensions. It parks two cars and little more.
- 22 feet wide: a small margin for mirrors and door swing.
- 24 feet wide: the standard. Each car gets its own door and about a foot of breathing room at each side.
- 28 to 30 feet wide: space for a tool wall or a third bay later.
- Depth of 24 to 30 feet: long enough for a workbench or storage across the back.
Our guides to the 20x20 metal building, the 24x24 metal building and the 24x30 metal building each go deep on one footprint, if you already know where you are heading.

Garage Door Widths and Ceiling Height
The doors set the usable width of the building. The two usual layouts are one wide door about 16 feet across or two single doors, each around 8 to 9 feet. Two singles leave a wall section between the doors, so each door runs on its own track and opener.
Door height is the number buyers forget. A standard door is 7 feet tall. Many steel garages ship with 8-foot doors for trucks and vans, and the door height drives the eave height of the building.
| Use | Door Layout | Door Height | Suggested Eave Height |
|---|---|---|---|
| Cars and small SUVs | One 16-foot or two 8–9-foot doors | 7 ft | 8 to 9 ft |
| Full-size pickups and vans | Two 9-foot doors | 8 ft | 10 ft |
| Lift-ready shop garage | Two 10-foot doors | 8 to 10 ft | 12 ft or more |
Eave height also moves price. Each extra foot of eave adds about 3% to the kit, so choose the height your tallest door and any storage rack need, and stop there. Overhead doors also need clearance above the opening for the track, so the practical ceiling is lower than the eave.

Get 2 Car Garage Prices for Your Size
Tell us the footprint, door count and eave height. Up to five suppliers quote the same garage, so you can compare like for like.
Get Free Garage Quotes✓ Up to 5 quotes fast and easy ✓ One short form ✓ Zero obligation
What Fits Inside: Trucks, Workbench and Storage
Dimensions mean little until a truck is parked in them. A full-size crew-cab pickup can run 20 feet or more in length, and its mirrors add width. Park two of them in a 20×20 and you will squeeze past with your hip against a fender.
Door swing is the other measure. A driver needs about three feet to step out without hitting the next car. Two cars side by side in a 24-foot width leave about that much at each door and a bit more between them.
What each size handles
- 20×20: two compact cars. No workbench, and no full-size truck.
- 24×24: two sedans or SUVs, or one truck and one car, with a wall shelf.
- 24×30: two trucks with a 6-foot workbench across the back wall.
- 30×30: two vehicles, a bench, a tool chest and a lawn mower or ATV bay.
If you own something unusual, such as a long-bed truck, a lifted vehicle or a boat on a trailer, run it through our Will My Vehicle Fit planner before choosing the width.
💡 The 2 1/2 car garage: some owners add a half bay, roughly 8 to 10 extra feet of depth or width, for a bike, a snowblower or a workbench. In steel it is just a slightly longer building.


Steel 2 Car Garage Kit Prices by Size
A steel 2 car garage is sold as a kit: frame, wall and roof panels, trim, fasteners and engineered drawings. Kits are priced per square foot of floor, and the rate drops as the building grows. These ranges are rounded to the nearest $100 and are materials only.
| Size | Floor Area | Kit Price Range | Typical Use |
|---|---|---|---|
| 20×20 | 400 sq ft | $5,200–$10,000 | Minimum two-car, or a one-car with storage |
| 22×22 | 484 sq ft | $6,300–$12,100 | Tight two-car |
| 24×24 | 576 sq ft | $7,500–$14,400 | Standard two-car |
| 24×30 | 720 sq ft | $6,500–$23,000 | Roomy two-car, bench space |
| 24×36 | 864 sq ft | $7,800–$27,600 | Two trucks with shop space |
| 30×30 | 900 sq ft | $8,100–$28,800 | Workshop garage |
The low end of one size can sit under the low end of a smaller one. That is the kit rate changing at 600 square feet, not a typo. The spread inside each row is wide because the frame, eave height, doors and the wind and snow loads the building is engineered for all move the price. A heavy-snow or hurricane rating alone can add about 20%.
Browse our metal garage buildings guide for the full range of sizes and layouts.

Cost to Build a Two Car Garage, Installed
A kit is only the steel. To answer how much it costs to build a two car garage, add the slab, erection, site preparation and permits. Here is a 24×30 worked line by line, with the total equal to the sum of its lines.
| Line | Rate | 24×30 (720 sq ft) |
|---|---|---|
| Kit (materials) | $9–$32 per sq ft | $6,500–$23,000 |
| Concrete slab, 4-inch | $6–$12 per sq ft | $4,300–$8,600 |
| Erection labor | $5–$12 per sq ft | $3,600–$8,600 |
| Site preparation | flat range | $1,300–$5,600 |
| Permits | varies by county | $500–$3,100 |
| Installed total | $16,200–$48,900 |
That is roughly $22 to $68 per square foot finished. The slab runs on published concrete figures, and erection on what metal building suppliers publish. Larger buildings sit toward the low end of erection, small ones nearer the middle. Crane work, tall eaves and tight sites cost more, and crews in metro and coastal areas charge 25 to 40% above rural ones.
Extras come on top. Electrical for a small building runs about $1,200 to $7,100, a mini-split about $2,000 to $9,200, and a drywall interior $1.50 to $3.50 per square foot. Plumbing needs a plumber's quote. Our metal garage cost calculator turns your own size and options into a number.
💡 Budget the slab first: on a two-car garage the slab and erection together can match the steel. Get a concrete quote before you order, and ask the kit supplier for the anchor bolt plan so the crew knows where each bolt goes.

See What Your Garage Would Cost
Send your size and location. Compare up to five competitive bids on the same garage, with the extras spelled out.
Compare Garage Quotes✓ Up to 5 competitive bids ✓ Free ✓ Compare quotes when ready
Kit Options: Detached, Loft, Lean-To and Tandem
Once the size is set, a few layout choices change what you get. A detached 2 car garage is the most common steel building: a free-standing shell, separate from the house, which keeps vehicle fumes out and lets you place it where the lot allows. An attached garage shares a wall with the home and brings fire-separation rules with it.
- Two car garage with loft: a mezzanine over part of the floor for storage. It needs a taller eave, and the framing and floor load must be engineered.
- 2 car garage with lean-to: a roofed side bay added for a tractor, boat or firewood. Cheaper than widening the building.
- Tandem garage: two cars parked front to back in a long, narrow bay behind a single door. Good on a narrow lot.
- Two car garage with workshop: a partition or a deeper footprint, typically 24×36 or 30×30, with its own power circuits.
- Portable and prebuilt options: a prefab 2 car garage ships as the same engineered kit, ready to bolt together on your slab. Ready-built units that are delivered whole are smaller and priced differently.
Frame choice matters at this size. Light-gauge tube framing suits most garages. Welded red iron costs more and earns its place for wide doors, a loft or heavy snow. The Metal Building Manufacturers Association publishes industry guidance on how these systems are designed.


Slab, Permits and Site Rules
The slab is a 4-inch concrete floor poured on prepared ground. Footing depth follows the local frost line, which ranges from about 12 inches in southern states to more than 42 inches in the north, so your county sets the number. Uncontrolled fill is not an acceptable bearing surface and has to be removed or stabilized.
Almost every jurisdiction requires a permit for a building this size. Thresholds and exemptions are set locally, so ask your building department before you order. The drawings that come with a kit are sealed by an engineer licensed in the state of construction, and the permit office will ask for them. The International Code Council publishes the model codes most places adopt, though each jurisdiction enforces its own edition.
Check setbacks and covenants first
A detached garage must sit a set distance from property lines and other buildings, and an HOA may restrict metal siding or size. Get the rules in writing before you pour a slab, because moving a building afterward is expensive.
Wind and snow loads are site-specific, never one number for a state. The kit supplier pulls them for your exact address. If you plan to heat or cool the space, the DOE Building Energy Codes Program is where insulation requirements by climate zone are maintained.

Frequently Asked Questions
The usual range is 20×20 to 24×24 feet, which is 400 to 576 square feet. A comfortable one is 24×30, or 720 square feet, with room for a workbench.
Most builders treat 24×24 feet, or 576 square feet, as standard. It parks two vehicles with the doors open and leaves a shelf's worth of storage space.
About 20 feet wide by 20 feet deep, or 400 square feet. It parks two cars but leaves little room for opening doors fully or storing anything.
Between 20 and 24 feet inside the walls is typical, and 24 feet is the standard width. Go to 28 or 30 feet for a tool wall or a bench along one side.
A typical two car garage runs 400 to 600 square feet. Roomy ones with workshop space reach 720 to 900 square feet.
Either one door about 16 feet wide or two doors of 8 to 9 feet each, usually 7 feet tall. Choose 8-foot-tall doors if you drive a full-size truck or van.
A 24×30 steel kit runs about $6,500–$23,000. Installed with a slab, erection, site work and permits, the total is roughly $16,200–$48,900, before electrical and interior work.
A 24×24 kit is about $7,500–$14,400 and a 24×30 about $6,500–$23,000, materials only. Foundation, erection and permits are extra.
Yes. A steel kit can be ordered with a taller eave and an engineered mezzanine. Ask the supplier to include the loft in the stamped drawings rather than adding it later.
Almost always. Local rules set the size thresholds, setbacks and drawings required, so check with your building department before you order.
Conclusion: Pick the Width, Then the Price
Decide how you will use the space, then pick the footprint. A 20×20 is the floor, a 24×24 is the standard, and a 24×30 gives you room to work. Choose door height for the tallest vehicle you will own, and keep the width generous.
Price the kit, then add the slab, erection, site work and permits to see the real total. Compare quotes on the same size and loads. Do that, and a steel two car garage is one of the most predictable buildings you can put up.
Related Resources
- Metal Garage Buildings: Sizes and Prices
- Metal Garage Cost Calculator
- 24x24 Metal Building: Prices, Layouts and What Fits
- 24x30 Metal Building: Costs and Layouts
- Will My Vehicle Fit? Metal Building Size Planner
Get Your Two-Car Garage Quote
Share your size and location, compare up to five quotes, and decide when you are ready. Free and zero obligation.
Get My Free Quotes✓ Compare quotes and decide ✓ Zero obligation
